// CODE SNIPPET
1910.261(i) Mechanical Pulp Process
JUMP TO FULL CODE CHAPTER
-
Water wheels directly connected to pulp grinders shall be provided with speed governors limiting the peripheral speed of the grinder to that recommended by the manufacturer.
Doors of pocket grinders shall be arranged so as to keep them from closing accidentally.
Hood guards shall be provided on butting saws, in accordance with American National Standard O1.1—1954 (reaffirmed 1961).
The requirements of paragraph (b)(3) of this section shall apply.
Persons exposed to falling material shall wear eye, head, foot, and shin protection equipment, in accordance with American National Standards Z87.1—1968, Z88.2—1969, Z89.1—1969, and Z41.1—1967.
Related Code Sections
1910.261(i) Special Industries, Mechanical Pulp Process
wheels directly connected to pulp grinders shall be provided with speed governors limiting ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(i) Mechanical Pulp Process
1910.261(i)(4) Special Industries, Personal Protection
Persons exposed to falling material shall wear eye, head, foot, and shin protection equipment, in accordance with American National Standards Z87.1 ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(i) Mechanical Pulp Process > 1910.261(i)(4) Personal Protection
1910.261(g) Special Industries, Chemical Processes of Making Pulp
as the processes of the sulfate and soda operations are similar to those of the sulfite processes, the standard of paragraphs (g) (1) through (17) of this section ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(g) Chemical Processes of Making Pulp
1910.261(j)(1) Special Industries, Pulp Shredders
Cutting heads shall be completely enclosed except for an opening at the feed side sufficient to permit only entry of stock. The enclosure shall ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(j) Stock Preparation > 1910.261(j)(1) Pulp Shredders
1910.261(j)(2) Special Industries, Pulp Conveyors
Pulp conveyors and conveyor drive belts and pulleys shall be fully enclosed, or if open and within 7 feet of the floor, shall be constructed ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(j) Stock Preparation > 1910.261(j)(2) Pulp Conveyors