// CODE SNIPPET
1910.252(d)(2) Mechanical Piping Systems
JUMP TO FULL CODE CHAPTER
The requirements of paragraphs (a), (b), and (c) of this section and 1910.253 and 1910.254 of this part shall be observed.
The use of X-rays and radioactive isotopes for the inspection of welded piping joints shall be in conformance with the American National Standard Safety Standard for Non-Medical X-ray and Sealed Gamma-Ray Sources, ANSI Z54.1-1963.
[39 FR 23502, June 27, 1974, as amended at 40 FR 23073, May 28, 1975; 43 FR 49750, Oct. 24, 1978; 49 FR 5323, Feb. 10, 1984; 51 FR 34562, Sept. 29, 1986; 54 FR 24334, June 7, 1989; 55 FR 13696, Apr. 11, 1990; 61 FR 9227, March 7, 1996; 63 FR 1152, Jan. 8, 1998; 74 FR 46357, Sept. 9, 2009; 77 FR 17777, March 26, 2012]
[39 FR 23502, June 27, 1974, as amended at 40 FR 23073, May 28, 1975; 43 FR 49750, Oct. 24, 1978; 49 FR 5323, Feb. 10, 1984; 51 FR 34562, Sept. 29, 1986; 54 FR 24334, June 7, 1989; 55 FR 13696, Apr. 11, 1990; 61 FR 9227, March 7, 1996; 63 FR 1152, Jan. 8, 1998; 74 FR 46357, Sept. 9, 2009; 77 FR 17777, March 26, 2012]
Related Code Sections
1910.252(d)(2) Welding, Cutting, and Brazing, Mechanical Piping Systems
piping joints shall be in conformance with the American National Standard Safety Standard for Non-Medical X-ray and Sealed Gamma-Ray Sources, ANSI Z54.1 ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(d) Industrial Applications > 1910.252(d)(2) Mechanical Piping Systems
1910.103(a)(1) Hazardous Materials, Definitions
is one in which the hydrogen is delivered, stored and discharged in the gaseous form to consumer's piping. The system includes stationary or movable ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.103 Hydrogen > 1910.103(a) General > 1910.103(a)(1) Definitions
1910.106(f)(4)(viii) Hazardous Materials, Piping and Fittings
in piping to which hoses are connected, and for articulated swivel-joint transfer systems, provided that the design is such that the mechanical strength ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable Liquids > 1910.106(f) Bulk Plants > 1910.106(f)(4) Wharves > 1910.106(f)(4)(viii) Piping and Fittings
1910.124(j) Hazardous Materials,
: Inspect the hoods and ductwork of the ventilation system for corrosion or damage ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.124 General Requirements for Dipping and Coating Operations > 1910.124(j)
1910.253(f)(7)(v) Welding, Cutting, and Brazing,
and the generator shall be disconnected from the piping system. The generator shall be kept filled with water, if possible, or positioned to hold as much water ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.253 Oxygen-Fuel Gas Welding and Cutting > 1910.253(f) Acetylene Generators > 1910.253(f)(7) Maintenance and Operation > 1910.253(f)(7)(v)