// CODE SNIPPET
[BS] 1404.12.6 Mechanical Fastenings
JUMP TO FULL CODE CHAPTER
Thin exterior structural glass veneer installed above the level of the heads of show windows and veneer installed more than 12 feet (3658 mm) above sidewalk level shall, in addition to the mastic cement and shelf angles, be held in place by the use of fastenings at each vertical or horizontal edge, or at the four corners of each glass unit. Fastenings shall be secured to the wall or backing with expansion bolts, toggle bolts or by other methods. Fastenings shall be so designed as to hold the glass veneer in a vertical plane independent of the mastic cement. Shelf angles providing both support and fastenings shall be permitted.
Related Code Sections
1404.12.6 Exterior Walls, Mechanical Fastenings
sidewalk level shall, in addition to the mastic cement and shelf angles, be held in place by the use of fastenings at each vertical or horizontal edge ...
Building Code 2018 of Illinois > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.12 Glass Veneer > 1404.12.6 Mechanical Fastenings
2304.11.4.1 Wood, Cross-Laminated Timber Roofs
and mechanically fastened to one another ...
Building Code 2018 of Illinois > 23 Wood > 2304 General Construction Requirements > 2304.11 Heavy Timber Construction > 2304.11.4 Roof Decks > 2304.11.4.1 Cross-Laminated Timber Roofs
1110.4.8.3 Accessibility, Minimum Number
that are built-in or mechanically fastened shall not be required to comply with this section ...
Building Code 2018 of Illinois > 11 Accessibility > 1110 Recreational Facilities > 1110.4 Recreational Facilities > 1110.4.8 Amusement Rides > 1110.4.8.3 Minimum Number
1507.2.8.3 Roof Assemblies and Rooftop Structures, Drip Edge
Drip edges shall be installed over underlayment along rake edges. Drip edges shall be mechanically fastened at intervals not greater than 12 inches ...
Building Code 2018 of Illinois > 15 Roof Assemblies and Rooftop Structures > 1507 Requirements for Roof Coverings > 1507.2 Asphalt Shingles > 1507.2.8 Flashings > 1507.2.8.3 Drip Edge
1609.5.3 Structural Design, Rigid Tile
The roof tiles shall be either loose laid on battens, mechanically fastened, mortar set or adhesive set. The roof tiles shall be installed on solid ...
Building Code 2018 of Illinois > 16 Structural Design > 1609 Wind Loads > 1609.5 Roof Systems > 1609.5.3 Rigid Tile