// CODE SNIPPET
1705.11.6 Mechanical and Electrical Components
JUMP TO FULL CODE CHAPTER
Special inspection for mechanical and electrical components shall be as follows:
- Periodic special inspection is required during the anchorage of electrical equipment for emergency and standby power systems in structures assigned to Seismic Design Category C, D, E or F;
- Periodic special inspection is required during the anchorage of other electrical equipment in structures assigned to Seismic Design Category E or F;
- Periodic special inspection is required during the installation and anchorage of piping systems designed to carry hazardous materials and their associated mechanical units in structures assigned to Seismic Design Category C, D, E or F;
- Periodic special inspection is required during the installation and anchorage of ductwork designed to carry hazardous materials in structures assigned to Seismic Design Category C, D, E or F; and
- Periodic special inspection is required during the installation and anchorage of vibration isolation systems in structures assigned to Seismic Design Category C, D, E or F where the construction documents require a nominal clearance of 1/4 inch (6.4 mm) or less between the equipment support frame and restraint.