// CODE SNIPPET
18.104.22.168* Measurement Parameters
Related Code Sections
22.214.171.124* Inspection, Testing, and Maintenance, Measurement Parameters
Signal levels shall be measured to ensure the system meets the criteria of 126.96.36.199 according to parameters as directed by the authority having ...
National Fire Alarm and Signaling Code 2013 of Colorado > 14 Inspection, Testing, and Maintenance > 14.4 Testing > 14.4.10* In-Building Emergency Radio Communication Systems > 188.8.131.52* Measurement Parameters
705.2 Special Conditions, Definitions
typically are used to measure and evaluate electrical parameters and provide the logic for the signal to initiate and complete transition processes ...
National Electrical Code 2020 of Colorado > 7 Special Conditions > 705 Interconnected Electric Power Production Sources > 705.2 Definitions
1184.108.40.206 Energy Systems, Additional Protection Measures
design parameters ...
Fire Code 2021 of Colorado > 12 Energy Systems > 1207 Electrical Energy Storage Systems (ESS) > 1207.1 General > 1207.1.4 Hazard Mitigation Analysis > 1220.127.116.11 Additional Protection Measures
118.104.22.168 Energy Systems, Additional Protection Measures
recognized standards and specified design parameters ...
Fire Code 2018 of Colorado > 12 Energy Systems > 1206 Electrical Energy Storage Systems > 1206.2 Stationary Storage Battery Systems > 1206.2.3 Hazard Mitigation Analysis > 122.214.171.124 Additional Protection Measures
1613.2.1 Structural Design, Mapped Acceleration Parameters
The parameters S S and S 1 shall be determined from the 0.2 and 1-second spectral response accelerations shown on Figures 1613.2.1(1) through ...
Building Code of the Department of Personnel & Administration/Office of the State Architect (DPA/OSA) > 16 Structural Design > 1613 Earthquake Loads > 1613.2 Seismic Ground Motion Values > 1613.2.1 Mapped Acceleration Parameters