// CODE SNIPPET
42-263 Maximum Permitted Quantities of Fissionable Materials
JUMP TO FULL CODE CHAPTER
In M1 or M2 Districts, no one of the following fissionable materials shall be assembled at any one point, place, or work area on a zoning lot in a quantity equal to or in excess of the amount set forth herein:
Material | Quantity |
Uranium-233 | 200 grams |
Plutonium-239 | 200 grams |
Uranium-235 | 350 grams |
In addition, any establishment which provides radiation waste disposal services in the nature of collection or storage of radioactive waste from other manufacturing uses shall be prohibited in M1 or M2 Districts.
Related Code Sections
414.2.2 Special Detailed Requirements Based on Use and Occupancy, Percentage of Maximum Allowable Quantities
The percentage of maximum allowable quantities of hazardous materials per control area permitted at each floor level within a building shall ...
NYC Building Code 2014 > 4 Special Detailed Requirements Based on Use and Occupancy > 414 Hazardous Materials > 414.2 Control Areas > 414.2.2 Percentage of Maximum Allowable Quantities
414.2.2 Special Detailed Requirements Based on Use and Occupancy, Percentage of Maximum Allowable Quantities
The percentage of maximum allowable quantities of hazardous materials per control area permitted at each floor level within a building shall ...
NYC Building Code 2022 > 4 Special Detailed Requirements Based on Use and Occupancy > 414 Hazardous Materials > 414.2 Control Areas > 414.2.2 Percentage of Maximum Allowable Quantities
Section 414 Special Detailed Requirements Based on Use and Occupancy, Hazardous Materials
be those spaces within a building where quantities of hazardous materials not exceeding the maximum quantities allowed by this code are stored, dispensed ...
NYC Building Code 2008 > 4 Special Detailed Requirements Based on Use and Occupancy > 414 Hazardous Materials
415.9.2.1.1 Special Detailed Requirements Based on Use and Occupancy, Aggregate Quantities
quantities of hazardous materials not exceeding the maximum allowable quantities per control area established by Tables 307.7(1) and 307.7(2 ...
NYC Building Code 2008 > 4 Special Detailed Requirements Based on Use and Occupancy > 415 Groups H-1, H-2, H-3, H-4 and H-5 > 415.9 Group H-5 > 415.9.2 Fabrication Areas > 415.9.2.1 Hazardous Materials in Fabrication Areas > 415.9.2.1.1 Aggregate Quantities
415.11.1.1.1 Special Detailed Requirements Based on Use and Occupancy, Aggregate Quantities
quantities of hazardous materials not exceeding the maximum allowable quantities per control area established by Tables 307.1(1) and 307.1(2 ...
NYC Building Code 2022 > 4 Special Detailed Requirements Based on Use and Occupancy > 415 Groups H-1, H-2, H-3, H-4 and H-5 > 415.11 Group H-5 > 415.11.1 Fabrication Areas > 415.11.1.1 Hazardous Materials > 415.11.1.1.1 Aggregate Quantities