// CODE SNIPPET
98-21 Maximum Floor Area Ratio Outside of Subareas
JUMP TO FULL CODE CHAPTER
For all zoning lots, or portions thereof, located outside of Subareas A through J, the maximum floor area ratios of the applicable underlying district shall apply.
Related Code Sections
218.104.22.168 Masonry, Maximum Diaphragm Ratio
not exceed the values given in Table 222.214.171.124. TABLE 2126.96.36.199 DIAPHRAGM LENGTH-TO-WIDTH RATIOS FLOOR OR ROOF DIAPHRAGM ...
NYC Building Code 2008 > 21 Masonry > 2109 Empirical Design of Masonry > 2109.2 Lateral Stability > 2109.2.1 Shear Walls > 2188.8.131.52 Maximum Diaphragm Ratio
506.4.1 General Building Heights and Areas; Separation of Occupancies, Mixed Occupancies
508.3.3 as separated occupancies, the maximum total building area shall be such that the sum of the ratios for each such area on all floors ...
NYC Building Code 2008 > 5 General Building Heights and Areas; Separation of Occupancies > 506 Area Modifications > 506.4 Area Determination > 506.4.1 Mixed Occupancies
Article 8 Materials, Loads and Stresses [PDF] (page 34)
stress can be determined by calculating the allowable stress at several points with Rb equal to the outside radius at each point. Bending moments ...
§27-566 Loads, Floor Live Loads
columns, piers, and walls supporting such floor areas the maximum live load reduction shall be twenty per cent. (c) No live load reduction shall ...
508.3.3.2 General Building Heights and Areas; Separation of Occupancies, Allowable Area
In each story, the building area shall be such that the sum of the ratios of the actual floor area of each occupancy divided by the allowable area ...
NYC Building Code 2008 > 5 General Building Heights and Areas; Separation of Occupancies > 508 Incidental Use Areas and Mixed Occupancies > 508.3 Mixed Occupancies > 508.3.3 Separated Occupancies > 508.3.3.2 Allowable Area