// CODE SNIPPET
1910.262(y)(1)(iv) Maximum Allowable Speed
JUMP TO FULL CODE CHAPTER
Each centrifugal extractor shall be effectively secured in position on the floor or foundation so as to eliminate unnecessary vibration, and should not be operated at a speed greater than the manufacturer's rating, which shall be stamped where easily visible in letters not less than one-quarter inch in height. The maximum allowable speed shall be given in revolutions per minute (rpm).
Related Code Sections
1910.262(y)(1)(iv) Special Industries, Maximum Allowable Speed
inch in height. The maximum allowable speed shall be given in revolutions per minute (rpm) ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(y) Extractors > 1910.262(y)(1) Centrifugal Extractor > 1910.262(y)(1)(iv) Maximum Allowable Speed
1910.265(e)(4)(i) Special Industries, Maximum Speed
Trimmer saws shall not be run at peripheral speeds in excess of those recommended by the manufacturer ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(e) Log Breakdown and Related Machinery and Facilities > 1910.265(e)(4) Trimmer Saws > 1910.265(e)(4)(i) Maximum Speed
1910.68(c)(2)(i) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Maximum Speed
No manlift designed for a speed in excess of 80 feet per minute shall be installed ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.68 Manlifts > 1910.68(c) Mechanical Requirements > 1910.68(c)(2) Speed > 1910.68(c)(2)(i) Maximum Speed
1910.219(d)(4) Machinery and Machine Guarding, Pulley Speeds
Pulleys intended to operate at rim speed in excess of manufacturers normal recommendations shall be specially designed and carefully balanced ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(d) Pulleys > 1910.219(d)(4) Pulley Speeds
1910.261(e)(11) Special Industries, Speed Governor
Water wheels, when directly connected to barker disks or grinders, shall be provided with speed governors, if operated with gate wide open ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(e) Preparing Pulpwood > 1910.261(e)(11) Speed Governor