// CODE SNIPPET
R608.5.1.3 Maximum Aggregate Size
JUMP TO FULL CODE CHAPTER
The nominal maximum size of coarse aggregate shall not exceed one-fifth the narrowest distance between sides of forms, or three-fourths the clear spacing between reinforcing bars or between a bar and the side of the form.
Exception: When approved, these limitations shall not apply where removable forms are used and workability and methods of consolidation permit concrete to be placed without honeycombs or voids.
Related Code Sections
R404.1.3.3.3 Foundations, Maximum Aggregate Size
The nominal maximum size of coarse aggregate shall not exceed one-fifth the narrowest distance between sides of forms, or three-fourths the clear ...
Residential Code 2018 of Kansas > 4 Foundations > R404 Foundation and Retaining Walls > R404.1 Concrete and Masonry Foundation Walls > R404.1.3 Concrete Foundation Walls > R404.1.3.3 Concrete, Materials for Concrete, and Forms > R404.1.3.3.3 Maximum Aggregate Size
R608.5.1.3 Wall Construction, Maximum Aggregate Size
The nominal maximum size of coarse aggregate shall not exceed one-fifth the narrowest distance between sides of forms, or three-fourths the clear ...
Residential Code 2018 of Kansas > 6 Wall Construction > R608 Exterior Concrete Wall Construction > R608.5 Materials > R608.5.1 Concrete and Materials for Concrete > R608.5.1.3 Maximum Aggregate Size
17.7.3 Anchoring to Concrete,
355.4, and shall not be less than twice the maximum aggregate size. In the absence of product-specific ACI 355.2 or ACI 355.4 test information ...
Building Code Requirements for Structural Concrete of Kansas > 17 Anchoring to Concrete > 17.7 Required Edge Distances, Spacings, and Thicknesses to Preclude Splitting Failure > 17.7.3
19.3.3.1 Concrete: Design and Durability Requirements,
Nominal maximum aggregate size, in. Target air content, percent F1 F2 and F3 3/8 6 7.5 1/2 5.5 7 1/3 5 ...
Building Code Requirements for Structural Concrete of Kansas > 19 Concrete: Design and Durability Requirements > 19.3 Concrete Durability Requirements > 19.3.3 Additional Requirements for Freezing-And-Thawing Exposure > 19.3.3.1
1908.10.2 Concrete, Panel Criteria
Where the maximum-size aggregate is larger than 3 / 8 inch (9.5 mm), the test panels shall have minimum dimensions of 18 inches by 18 inches (457 ...
Building Code 2018 of Kansas > 19 Concrete > 1908 Shotcrete > 1908.10 Strength Tests > 1908.10.2 Panel Criteria