// CODE SNIPPET
A5.409.3 Materials and System Assemblies
JUMP TO FULL CODE CHAPTER
If whole building analysis of the project is not elected, select a minimum of 50 percent of materials or assemblies based on life cycle assessment of at least three of the impacts listed in Section A5.409.2.2, one of which shall be climate change.
Note: Software for calculating life cycle assessments for assemblies and materials may be found at the Athena Institute web site and the NIST BEES web site.
Related Code Sections
A5.409.3 Nonresidential Voluntary Measures, Materials and System Assemblies
If whole building analysis of the project is not elected, select a minimum of 50 percent of materials or assemblies based on life cycle assessment ...
Los Angeles Green Building Code > A5 Nonresidential Voluntary Measures > A5.409 Life Cycle Assessment > A5.409.3 Materials and System Assemblies
A5.409.3 Nonresidential Voluntary Measures, Materials and System Assemblies
If whole building analysis of the project is not elected, select a minimum of 50 percent of materials or assemblies based on life cycle assessment ...
Los Angeles Green Building Code > A5 Nonresidential Voluntary Measures > A5.409 Life Cycle Assessment > A5.409.3 Materials and System Assemblies
703A.1 [SFM] Materials and Construction Methods for Exterior Wildfire Exposure, General
Building material, systems, assemblies and methods of construction used in this chapter shall be in accordance with Section 703A ...
Los Angeles Building Code > 7A [SFM] Materials and Construction Methods for Exterior Wildfire Exposure > 703A Standards of Quality > 703A.1 General
R337.3.1 Building Planning, General
Building material, systems, assemblies and methods of construction used in this chapter shall be in accordance with Section R337.3 ...
Section 701 Fire and Smoke Protection Features, General
The provisions of this chapter shall govern the materials, systems and assemblies used for structural fire resistance and fire-resistance-rated ...