1917.4 Materials and Limitations of Use
Lightweight insulating concrete shall be poured over bottom slotted galvanized (G-90) steel decking as follows; cellular, 0.5-percent open; hybrid, 0.75-percent open, aggregate, 1.5-percent open. No lightweight insulating concrete shall be poured over a painted or nongalvanized steel deck.
- Packaged insulation board delivered to the job site shall comply with the provisions of Section 2603.2.
- Installation of insulating board in conjunction with lightweight insulating concrete shall comply with uplift requirements set forth in Section 1609 (Section 1620 for the High-Velocity Hurricane Zone). Insulation panels shall be placed in a minimum 1/8-inch (3.2 mm) slurry of insulating concrete while the material is still in a plastic state. The insulating concrete shall be cast over the insulation boards according to the insulating concrete manufacturer's product approval. Insulation panels shall be provided with holes and/or slots for keying and venting.