// CODE SNIPPET
1926.605(a) Material Handling Operations
JUMP TO FULL CODE CHAPTER
Operations fitting the definition of "material handling" shall be performed in conformance with applicable requirements of Part 1918, "Safety and Health Regulations for Longshoring" of this chapter. The term "longshoring operations" means the loading, unloading, moving, or handling of construction materials, equipment and supplies, etc. into, in, on, or out of any vessel from a fixed structure or shore-to-vessel, vessel-to-shore or fixed structure or vessel-to-vessel.
Related Code Sections
1926.605(a) Motor Vehicles, Mechanized Equipment, and Marine Operations, Material Handling Operations
Operations fitting the definition of "material handling" shall be performed in conformance with applicable requirements of Part 1918, "Safety ...
OSHA 1926 Construction > O Motor Vehicles, Mechanized Equipment, and Marine Operations > 1926.605 Marine Operations and Equipment > 1926.605(a) Material Handling Operations
1926.57(i)(13)(ii) Occupational Health and Environmental Controls, Molton Materials Handling Operations
Molton materials handling operations means all operations, other than welding, burning, and soldering operations, involving the use, melting ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.57 Ventilation > 1926.57(i) Open Surface Tanks > 1926.57(i)(13) Scope > 1926.57(i)(13)(ii) Molton Materials Handling Operations
1926.1124(f)(2)(i)(C) Toxic and Hazardous Substances,
Local exhaust ventilation, such as at the points of operation, material handling, and transfer; or ...
OSHA 1926 Construction > Z Toxic and Hazardous Substances > 1926.1124 Beryllium > 1926.1124(f) Methods of Compliance > 1926.1124(f)(2) Engineering and Work Practice Controls > 1926.1124(f)(2)(i) > 1926.1124(f)(2)(i)(C)
1926.300(b)(4)(iii) Tools - Hand and Power,
Special handtools for placing and removing material shall be such as to permit easy handling of material without the operator placing a hand ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.300 General Requirements > 1926.300(b) Guarding > 1926.300(b)(4) Point of Operation Guarding > 1926.300(b)(4)(iii)
1926.602(d) Motor Vehicles, Mechanized Equipment, and Marine Operations, Powered Industrial Truck Operator Training
Note: The requirements applicable to construction work under this paragraph are identical to those set forth at ยง1910.178(l) of this chapter ...
OSHA 1926 Construction > O Motor Vehicles, Mechanized Equipment, and Marine Operations > 1926.602 Material Handling Equipment > 1926.602(d) Powered Industrial Truck Operator Training