// CODE SNIPPET
(3) Material Classification Group
Go To Full Code Chapter
The marking shall specify the applicable material classification group(s) or specific gas, vapor, dust, or fiber/flying in accordance with 500.6.
Exception: Fixed luminaires marked for use only in Class I, Division 2 or Class II, Division 2 locations shall not be required to indicate the group.
Informational Note: A specific gas, vapor, dust, or fiber/flying is typically identified by the generic name, chemical formula, CAS number, or combination thereof.
Related Code Sections
(3) Special Occupancies, Material Classification Group
The marking shall specify the applicable material classification group(s) or specific gas, vapor, dust, or fiber/flying in accordance with 500.6 ...
(3) Special Occupancies, Material Classification Group
The marking shall specify the applicable material classification group(s) or specific gas, vapor, dust, or fiber/flying in accordance with 500.6 ...
(2) Special Occupancies, Group B
:3.3.5.1.2] Informational Note: A typical Class I, Group B material is hydrogen. Exception No. 1: Group D equipment shall be permitted to be used ...
(3) Special Occupancies, Group G
]
Informational Note No. 1: For additional information on group classification of Class II materials, see NFPA 499-2017, Recommended Practice ...