// CODE SNIPPET
P-507.4 Material and Design
JUMP TO FULL CODE CHAPTER
The bodies of cleanout ferrules shall conform in thickness to that required for pipe and
fittings of the same metal or of nylon resin, shall extend not less than 1/8 inch and shall be provided with a raised nut
or recessed socket for removal.
Both ferrule and plug shall have American National Tapered Pipe Threads and are permitted
for repairing a cleanout, where necessary.
Related Code Sections
P-507.4 Traps, Cleanouts, Interceptors, and Backwater Valves, Material and Design
The bodies of cleanout ferrules shall conform in thickness to that required for pipe and
fittings of the same metal or of nylon resin, shall extend ...
Philadelphia Plumbing Code > 5 Traps, Cleanouts, Interceptors, and Backwater Valves > P-507 Cleanouts > P-507.4 Material and Design
22.37.1.2 Special Occupancy Requirements, General Requirements for Storage of Ammonium Nitrate Solids and Liquids
Sprinkler systems shall be of the approved type and designed and installed in accordance with NFPA 13, and the following: Ammonium nitrate ...
Standard for the Installation of Sprinkler Systems 2016 of Philadelphia > 22 Special Occupancy Requirements > 22.37 Hazardous Materials Code > 22.37.1 Design Requirements > 22.37.1.2 General Requirements for Storage of Ammonium Nitrate Solids and Liquids