// CODE SNIPPET
1905.2.4 Mass Concrete
JUMP TO FULL CODE CHAPTER
For areas of high-strength mass concrete, including but not limited to, 8,000 psi (55 158 kPa) or greater and the least dimension being equal to or greater than 36 inches (914 mm), as indicated on the construction documents, a thermal control plan complying with ACI 301, Section 8.1 and acceptable to the registered design professional of record shall be submitted by the contractor.
Related Code Sections
1905.2.4 Concrete, Mass Concrete
For areas of high-strength mass concrete, including but not limited to, 8,000 psi (55 158 kPa) or greater and the least dimension being equal ...
NYC Building Code 2014 > 19 Concrete > 1905 Concrete Quality, Mixing and Placing > 1905.2 Selection of Concrete Proportions > 1905.2.4 Mass Concrete
Section 1902 Concrete, Definitions
construction, have the meanings shown herein and in ACI 318, as modified by Section 1908.1.1 of this chapter. MASS CONCRETE. Any volume of concrete ...
1901.4 Concrete, Construction Documents
of ACI 318. Areas of mass-concrete where a thermal control plan is required ...
§27-613 Structural Work, Concrete Utilizing Preplaced Aggregate
The use of concrete formed by the injection of grout into a mass of preplaced coarse aggregate will be permitted where it can be demonstrated ...
NYC 1968 Code (Vol I) > 10 Structural Work > 5 Concrete > §27-613 Concrete Utilizing Preplaced Aggregate
1905.6 Concrete, Evaluation and Acceptance of Concrete
For mass concrete sections identified as requiring monitoring, install temperature devices that are capable ...
NYC Building Code 2014 > 19 Concrete > 1905 Concrete Quality, Mixing and Placing > 1905.6 Evaluation and Acceptance of Concrete