// CODE SNIPPET
1926.702(i) Masonry Saws
JUMP TO FULL CODE CHAPTER
Masonry saw shall be guarded with a semicircular enclosure over the blade.
A method for retaining blade fragments shall be incorporated in the design of the semicircular enclosure.
Related Code Sections
1926.702(i) Concrete and Masonry Construction, Masonry Saws
Masonry saw shall be guarded with a semicircular enclosure over the blade ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.702 Requirements for Equipment and Tools > 1926.702(i) Masonry Saws
1926.1153(c)(1) Toxic and Hazardous Substances,
protection and minimum assigned protection factor (APF)
≤ 4 hours/shift
>4 hours/shift
(i) Stationary masonry saws ...
OSHA 1926 Construction > Z Toxic and Hazardous Substances > 1926.1153 Respirable Crystalline Silica > 1926.1153(c) Specified Exposure Control Methods > 1926.1153(c)(1)
1926.300(b)(4)(iv)(f) Tools - Hand and Power, Power Saws
OSHA 1926 Construction > I Tools - Hand and Power > 1926.300 General Requirements > 1926.300(b) Guarding > 1926.300(b)(4) Point of Operation Guarding > 1926.300(b)(4)(iv) > 1926.300(b)(4)(iv)(f) Power Saws
1926.304(g) Tools - Hand and Power, Radial Saws
The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.304 Woodworking Tools > 1926.304(g) Radial Saws
Subpart Q Concrete and Masonry Construction, App A - References to Subpart Q of Part 1926
Formwork (ACI 347-78).
Safety Requirements for Concrete and Masonry Work (ANSI A10.9-1983).
Standard Test Method for Compressive Strength ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > Q App A - References to Subpart Q of Part 1926