UpCodes logo
Go To Full Code Chapter
Masonry rough opening dimensions shall be within the tolerances specified in Section R606.3.1.1 and, in addition, shall provide for a window perimeter sealant joint a maximum of 1/4 inch (6.4 mm) in width.

Related Code Sections

R609.9 Wall Construction, Masonry Rough Openings
Masonry rough opening dimensions shall be within the tolerances specified in Section R606.3.1.1 and, in addition, shall provide for a window ...
R609.9 Wall Construction, Masonry Rough Openings
Masonry rough opening dimensions shall be within the tolerances specified in Section R606.3.1.1 and, in addition, shall provide for a window ...
R612.8.4 Wall Construction, Masonry Rough Openings
Masonry rough opening dimensions shall be within the tolerances specified at Section R606.16 and, in addition, shall provide for a window perimeter ...
R606.3.1.1 Wall Construction, Masonry Opening Tolerances
Masonry rough openings may vary in the cross section dimension or elevation dimension specified on the approved plans from - 1/4 inch (6.4 mm) to + 1 ...
R606.3.1.1 Wall Construction, Masonry Opening Tolerances
Masonry rough openings may vary in the cross section dimension or elevation dimension specified on the approved plans from - 1/4 inch (6.4 mm) to + 1 ...