// CODE SNIPPET
712.1.8 Masonry Chimney
JUMP TO FULL CODE CHAPTER
Approved vertical openings for masonry chimneys shall be permitted where the annular space is fireblocked at each floor level in accordance with Section 718.2.5.
Related Code Sections
Section 2113 Masonry, Masonry Chimneys
The construction of masonry chimneys consisting of solid masonry units, hollow masonry units grouted solid, stone or concrete shall be in accordance ...
Section 2113 Masonry, Masonry Chimneys
The construction of masonry chimneys consisting of solid masonry units, hollow masonry units grouted solid, stone or concrete shall be in accordance ...
308.4.2.2 General Regulations, Masonry Chimneys
The clearance reduction methods specified in Table 308.4.2 shall not be utilized to reduce the clearances required for masonry chimneys ...
Mechanical Code 2015 of Utah > 3 General Regulations > 308 Clearance Reduction > 308.4 Allowable Reduction > 308.4.2 Reduction Table > 308.4.2.2 Masonry Chimneys
308.4.2.2 General Regulations, Masonry Chimneys
The clearance reduction methods specified in Table 308.4.2 shall not be utilized to reduce the clearances required for masonry chimneys ...
Mechanical Code 2018 of Utah > 3 General Regulations > 308 Clearance Reduction > 308.4 Allowable Reduction > 308.4.2 Reduction Table > 308.4.2.2 Masonry Chimneys
501.11 Chimneys and Vents, Masonry Chimneys
Masonry chimneys utilized to vent appliances shall be located, constructed and sized as specified in the manufacturer's installation instructions ...