// CODE SNIPPET
R703.11.2.3 Manufacturer Specification
JUMP TO FULL CODE CHAPTER
Where the vinyl siding manufacturer's product specifications provide an approved design wind pressure rating for installation over foam plastic sheathing, use of this design wind pressure rating shall be permitted and the siding shall be installed in accordance with the manufacturer's installation instructions.
Related Code Sections
R703.11.2.3 Wall Covering, Manufacturer Specification
Where the vinyl siding manufacturer's product specifications provide an approved design wind pressure rating for installation over foam plastic ...
Minnesota Residential Code 2015 > 7 Wall Covering > R703 Exterior Covering > R703.11 Vinyl Siding > R703.11.2 Foam Plastic Sheathing > R703.11.2.3 Manufacturer Specification
5503.4.3 Cryogenic Fluids, Identification of Containers
Stationary containers shall be identified with the manufacturing specification and maximum allowable working pressure with a permanent nameplate. The ...
Minnesota Fire Code 2015 > 55 Cryogenic Fluids > 5503 General Requirements > 5503.4 Marking > 5503.4.3 Identification of Containers
5503.4.3 Cryogenic Fluids, Identification of Containers
Stationary containers shall be identified with the manufacturing specification and maximum allowable working pressure with a permanent nameplate. The ...
2020 Minnesota State Fire Code > 55 Cryogenic Fluids > 5503 General Requirements > 5503.4 Marking > 5503.4.3 Identification of Containers
412.7 Gas Piping Installations, Installation of Dispensing Devices and Equipment
petroleum gas dispensers and dispensing stations shall be installed in accordance with manufacturers' specifications and their listing ...
Minnesota Fuel Gas Code 2015 > 4 Gas Piping Installations > 412 (IFGC) Liquefied Petroleum Gas Motor Vehicle Fuel-Dispensing Facilities > 412.7 Installation of Dispensing Devices and Equipment
5303.2 Compressed Gases, Design and Construction
Compressed gas containers, cylinders and tanks shall be designed, fabricated, tested, marked with the specifications of manufacture and maintained ...
2020 Minnesota State Fire Code > 53 Compressed Gases > 5303 General Requirements > 5303.2 Design and Construction