2415.5.3 Manufacturer'S Testing, Recommendation and Approval

Compatibility of all components and fabrication procedures of structural glazing systems shall be tested, approved and recommended in writing by the manufacturer of the adhesive; the manufacturer of the coating; whether it is anodized, baked or otherwise applied and the manufacturer of the glass panel.

Manufacturer's testing, recommendation and approval shall address, but shall not be limited in scope by the following sections.

The compatibility of the sealant with metal, glazing materials, shims, spacers, setting blocks, backer rods, gaskets and other materials.

Adhesion to the designated substrates and adhesion of the substrates to the base metal.

The design and structural capability of silicone joints and cross sections.