// CODE SNIPPET
3405.4.5 Manufacturer's Manual and Material Safety Data Sheets
JUMP TO FULL CODE CHAPTER
The manufacturer's manual for the installation, operation and servicing of the solvent distillation unit shall be maintained on the premises, readily available to the user and for inspection by any department representative. In accordance with FC2703.4, material safety data sheets shall be maintained on the premises for each flammable or combustible liquid used in the distillation unit.
Related Code Sections
3319.8.5 Safeguards During Construction or Demolition, Safety Coordination and Pre-Jump Safety Meeting Topics
warnings; Compliance with the manufacturer's manual; and Softening mechanisms, if using nylon slings ...
NYC Building Code 2014 > 33 Safeguards During Construction or Demolition > 3319 Cranes and Derricks > 3319.8 Special Provisions for Tower and Climber Cranes > 3319.8.5 Safety Coordination and Pre-Jump Safety Meeting Topics
3319.8.5 Safeguards During Construction or Demolition, Safety Coordination and Pre-Jump Safety Meeting Topics
; Compliance with the manufacturer's manual; and Softening mechanisms, if using nylon slings. *Section BC 3319.8.5 was added by: Local Law 46 ...
NYC Building Code 2008 > 33 Safeguards During Construction or Demolition > 3319 Cranes and Derricks > 3319.8 Special Provisions for Tower and Climber Cranes > 3319.8.5 Safety Coordination and Pre-Jump Safety Meeting Topics
417.5.2.1 Fixtures, Faucets and Fixture Fittings, PVC Sheets
Plasticized polyvinyl chloride (PVC) sheets shall be a minimum of 0.040 inch (1.02 mm) thick, and shall meet the requirements of ASTM D 4551. Sheets ...
NYC Plumbing Code 2014 > 4 Fixtures, Faucets and Fixture Fittings > 417 Showers > 417.5 Shower Floors or Receptors > 417.5.2 Shower Lining > 417.5.2.1 PVC Sheets
902.2 Vents, Sheet Copper
Sheet copper for vent pipe flashings shall conform to ASTM B 152 and shall weigh not less than 8 ounces per square foot (2.5 kg/m 2 ) ...
902.2 Vents, Sheet Copper
Sheet copper for vent pipe flashings shall conform to ASTM B 152 and shall weigh not less than 8 ounces per square foot (2.5 kg/m 2 ) ...