// CODE SNIPPET
605.8 Manufactured Pipe Nipples
Related Code Sections
605.8 Water Supply and Distribution, Manufactured Pipe Nipples
Manufactured pipe nipples shall conform to one of the standards listed in Table 605.8. TABLE 605.8 MANUFACTURED PIPE NIPPLES MATERIAL ...
Plumbing Code 2018 of Kansas > 6 Water Supply and Distribution > 605 Materials, Joints and Connections > 605.8 Manufactured Pipe Nipples
P2609.1 General Plumbing Requirements, Identification
of the manufacturer and any markings required by the applicable referenced standards. Nipples created from the cutting and threading of approved pipe shall ...
Residential Code 2018 of Kansas > 26 General Plumbing Requirements > P2609 Materials Evaluation and Listing > P2609.1 Identification
3.5.9 Definitions, Riser Nipple
A vertical pipe between the cross main and branch line ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 3 Definitions > 3.5* System Component Definitions > 3.5.9 Riser Nipple
188.8.131.52 Installation Requirements, Revamping of Pipe Schedule Systems
When pipe schedule systems are revamped, a nipple not exceeding 4 in. (100 mm) in length shall be permitted to be installed in the branch line ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 8 Installation Requirements > 8.15 Special Situations > 8.15.20 Piping to Sprinklers Below Ceilings > 184.108.40.206 Revamping of Pipe Schedule Systems
220.127.116.11.6.1* Hanging, Bracing, and Restraint of System Piping,
= length of riser nipple piping (in inches) W p = tributary weight (in pounds) for the branch line or portion of branch line within ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 9 Hanging, Bracing, and Restraint of System Piping > 9.3 Protection of Piping Against Damage Where Subject to Earthquakes > 9.3.5* Sway Bracing > 18.104.22.168* Horizontal Seismic Loads > 22.214.171.124.6* > 126.96.36.199.6.1*