// CODE SNIPPET
R324.1.8 Manufactured Housing
JUMP TO FULL CODE CHAPTER
New or replacement manufactured housing shall be elevated in accordance with Section R324.2 and the anchor and tie-down requirements of Sections AE604 and AE605 of Appendix E shall apply. The foundation and anchorage of manufactured housing to be located in identified flood ways as established in Table R301.2(1) shall be designed and constructed in accordance with the applicable provisions in the Building Code of New York State.
Related Code Sections
R324.1.8 Building Planning, Manufactured Housing
New or replacement manufactured housing shall be elevated in accordance with Section R324.2 and the anchor and tie-down requirements of Sections ...
2010 Residential Code of NY > 3 Building Planning > R324 Flood-Resistant Construction > R324.1 General > R324.1.8 Manufactured Housing
Appendix E Manufactured Housing Used as Dwellings
(The provisions contained in this appendix are not mandatory unless specifically referenced in the adopting ordinance ...
Section E102 Manufactured Housing Used as Dwellings, Application to Existing Manufactured Homes and Building Service Equipment
Manufactured Housing Construction and Safety Standards Act of 1974 (42 U.S.C. Section 5401, et seq.). Be designed and constructed to conform ...
2010 Residential Code of NY > E Manufactured Housing Used as Dwellings > E102 Application to Existing Manufactured Homes and Building Service Equipment
Section AE201 Manufactured Housing Used as Dwellings, Definitions
herein. ACCESSORY BUILDING. Any building or structure or portion thereto, located on the same property as a manufactured home , which does ...
Residential Code 2015 of New York State > E Manufactured Housing Used as Dwellings > AE201 Definitions