// CODE SNIPPET
1910.68(c)(5)(ii) Manual Reset Location
JUMP TO FULL CODE CHAPTER
After the manlift has been stopped by a stop device it shall be necessary to reset the automatic stop manually. The device shall be so located that a person resetting it shall have a clear view of both the "up" and "down" runs of the manlift. It shall not be possible to reset the device from any step or platform.
Related Code Sections
1910.68(c)(5)(ii) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Manual Reset Location
After the manlift has been stopped by a stop device it shall be necessary to reset the automatic stop manually. The device shall be so located ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.68 Manlifts > 1910.68(c) Mechanical Requirements > 1910.68(c)(5) Up Limit Stops > 1910.68(c)(5)(ii) Manual Reset Location
1910.216(e) Machinery and Machine Guarding, Trip and Emergency Switches
All trip and emergency switches shall not be of the automatically resetting type, but shall require manual resetting ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.216 Mills and Calenders in the Rubber and Plastics Industries > 1910.216(e) Trip and Emergency Switches
1910.263(l)(9)(v)(f) Special Industries,
Manual reset-type safety shutoff valves shall be so arranged that they cannot be locked in an open position by external means ...
OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery Equipment > 1910.263(l) Ovens > 1910.263(l)(9) General Requirements > 1910.263(l)(9)(v) > 1910.263(l)(9)(v)(f)
1910.217(h)(6)(vi) Machinery and Machine Guarding,
shall be manually adjustable, to a maximum time of 30 seconds. For any timer setting greater than 15 seconds, the adjustment shall be made by the use ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.217 Mechanical Power Presses > 1910.217(h) Presence Sensing Device Initiation (PSDI) > 1910.217(h)(6) Cycle Control and Control Systems > 1910.217(h)(6)(vi)