// CODE SNIPPET
513.4.3 Manual Reset
JUMP TO FULL CODE CHAPTER
Shutoff devices shall require manual reset. [NFPA 96:10.4.4]
Related Code Sections
513.4.3 Exhaust Systems, Manual Reset
Shutoff devices shall require manual reset. [NFPA 96:10.4.4] ...
2018 Uniform Mechanical Code of Nevada > 5 Exhaust Systems > 513.0 Fire-Extinguishing Equipment > 513.4 Fuel and Electric Power Shutoff > 513.4.3 Manual Reset
516.3.3.1 Exhaust Systems, Manual Reset
The sensor shall be a manual reset device or circuit. [NFPA 96:13.3.4.2] ...
2018 Uniform Mechanical Code of Nevada > 5 Exhaust Systems > 516.0 Recirculating Systems > 516.3 Interlocks > 516.3.3 ESP Interlocks > 516.3.3.1 Manual Reset
518.4.2 Exhaust Systems, Manual Reset
The airflow switch or transducer shall be a manual reset device or circuit. [NFPA 96:15.3.3] ...
2018 Uniform Mechanical Code of Nevada > 5 Exhaust Systems > 518.0 Downdraft Appliances > 518.4 Airflow Switch or Transducer > 518.4.2 Manual Reset
7.9.8.3.3 System Requirements,
All shutdown devices shall be of the type that requires manual resetting prior to fuel or power being restored ...
Standard for the Installation of Sprinkler Systems 2016 of Nevada > 7 System Requirements > 7.9 Commercial-Type Cooking Equipment and Ventilation > 7.9.8 Cooking Equipment > 7.9.8.3 Fuel and Heat Shutoff > 7.9.8.3.3
23.8.5.8.2 Protected Premises Fire Alarm Systems,
Supervisory signals that latch in the off-normal state and require manual reset of the system to restore them to normal shall be permitted ...
National Fire Alarm and Signaling Code 2016 of Nevada > 23 Protected Premises Fire Alarm Systems > 23.8 System Requirements > 23.8.5 Fire Alarm System Inputs > 23.8.5.8* Supervisory Signal Initiation — Fire Suppression Systems Other Than Sprinklers > 23.8.5.8.2