// CODE SNIPPET
5705.2.5 Manual Container Filling Operations
JUMP TO FULL CODE CHAPTER
Class I liquids or Class II and Class III liquids that are heated up to or above their flash points shall not be transferred into containers unless the nozzle and containers are electrically interconnected. Acceptable methods of electrical interconnection include either of the following:
- Metallic floor plates on which containers stand while filling, where such floor plates are electrically connected to the fill stem.
- Where the fill stem is bonded to the container during filling by means of a bond wire.
Related Code Sections
5705.2.5 Flammable and Combustible Liquids, Manual Container Filling Operations
: Metallic floor plates on which containers stand while filling, where such floor plates are electrically connected to the fill stem. Where the fill stem ...
Fire Code 2015 of New York State > 57 Flammable and Combustible Liquids > 5705 Dispensing, Use, Mixing and Handling > 5705.2 Liquid Transfer > 5705.2.5 Manual Container Filling Operations
5705.2.5 Flammable and Combustible Liquids, Manual Container Filling Operations
: Metallic floor plates on which containers stand while filling, where such floor plates are electrically connected to the fill stem. Where the fill stem ...
2020 Fire Code of NYS > 57 Flammable and Combustible Liquids > 5705 Dispensing, Use, Mixing and Handling > 5705.2 Liquid Transfer > 5705.2.5 Manual Container Filling Operations
3405.2.5 Flammable and Combustible Liquids, Manual Container Filling Operations for Class I Liquids
while filling, when such floor plates are electrically connected to the fill stem; or Where the fill stem is bonded to the container during filling ...
2010 Fire Code of NY > 34 Flammable and Combustible Liquids > 3405 Dispensing, Use, Mixing and Handling > 3405.2 Liquid Transfer > 3405.2.5 Manual Container Filling Operations for Class I Liquids
2204.4 Motor Fuel-Dispensing Facilities and Repair Garages, Dispensing Into Portable Containers
container shall be in compliance with Section 2206.7.6 and be manually held open during the dispensing operation ...
2010 Fire Code of NY > 22 Motor Fuel-Dispensing Facilities and Repair Garages > 2204 Dispensing Operations > 2204.4 Dispensing Into Portable Containers
2304.4 Motor Fuel-Dispensing Facilities and Repair Garages, Dispensing Into Portable Containers
valve used for dispensing Class I liquids into a portable container shall be in compliance with Section 2306.7.6 and be manually held open during ...
Fire Code 2015 of New York State > 23 Motor Fuel-Dispensing Facilities and Repair Garages > 2304 Dispensing Operations > 2304.4 Dispensing Into Portable Containers