// CODE SNIPPET
(A) Manual
Related Code Sections
(A) Special Occupancies, Manual
Dimmers and switches are operated by handles mechanically linked to the control devices ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 520 Theaters, Audience Areas of Motion Picture and Television Studios, Performance Areas, and Similar Locations > 520.26 Type of Switchboard > (A) Manual
1103.7.2.2.1 Construction Requirements for Existing Buildings, Manual Activation
smoke detection,
manual fire alarm boxes are only required in the
main office and in a custodial area ...
2020 Minnesota State Fire Code > 11 Construction Requirements for Existing Buildings > 1103 Fire Safety Requirements for Existing Buildings > 1103.7 Fire Alarm Systems > 1103.7.2 Group I-1 > 1103.7.2.2 Initiation > 1103.7.2.2.1 Manual Activation
1103.7.2.2.1 Construction Requirements for Existing Buildings, Manual Activation
The requirements for manual fire alarm pull boxes can be modified as follows: In buildings equipped throughout by an approved , supervised fire ...
Minnesota Fire Code 2015 > 11 Construction Requirements for Existing Buildings > 1103 Fire Safety Requirements for Existing Buildings > 1103.7 Fire Alarm Systems > 1103.7.2 Group E, General > 1103.7.2.2 Initiation > 1103.7.2.2.1 Manual Activation
1205.10 Energy Systems, Manual Shutoff
Access to a manual shutoff valve shall be provided for the fuel piping within 6 feet (1829 mm) of any fuel storage tank serving the fuel cell ...
2020 Minnesota State Fire Code > 12 Energy Systems > 1205 Stationary Fuel Cell Power Systems > 1205.10 Manual Shutoff
3003.1.1 Elevators and Conveying Systems, Manual Transfer
At elevator locations where standby power is required, standby
power shall be manually transferable to all elevators in each bank. Standby power ...
2020 Minnesota Building Code > 30 Elevators and Conveying Systems > 3003 Emergency Operations > 3003.1 Standby Power > 3003.1.1 Manual Transfer