// CODE SNIPPET
1926.66(f)(7) Maintenance of Grounds
JUMP TO FULL CODE CHAPTER
Objects being painted or coated shall be maintained in metallic contact with the conveyor or other grounded support. Hooks shall be regularly cleaned to insure this contact and areas of contact shall be sharp points or knife edges where possible. Points of support of the object shall be concealed from random spay where feasible and where the objects being sprayed are supported from a conveyor, the point of attachment to the conveyor shall be so located as to not collect spray material during normal operation.
Related Code Sections
1926.66(f)(7) Occupational Health and Environmental Controls, Maintenance of Grounds
Objects being painted or coated shall be maintained in metallic contact with the conveyor or other grounded support. Hooks shall be regularly cleaned ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.66 Criteria for Design and Construction of Spray Booths > 1926.66(f) Electrostatic Hand Spraying Equipment > 1926.66(f)(7) Maintenance of Grounds
1926.1002(j)(2) Rollover Protective Structures; Overhead Protection,
in 29 CFR 1926.1001), used in operations such as landscaping, construction services, loading, digging, grounds keeping, and highway maintenance ...
OSHA 1926 Construction > W Rollover Protective Structures; Overhead Protection > 1926.1002 Protective Frames (Roll-Over Protective Structures, Known as ROPS) for Wheel-Type Agricultural and Industrial Tractors Used in Construction > 1926.1002(j) Definitions Applicable to This Section > 1926.1002(j)(2)
1926.404(f)(1)(v) Electrical, Exceptions
AC systems of 50 volts to 1000 volts are not required to be grounded if the system is separately derived and is supplied by a transformer that has ...
OSHA 1926 Construction > K Electrical > 1926.404 Wiring Design and Protection > 1926.404(f) Grounding > 1926.404(f)(1) Systems to Be Grounded > 1926.404(f)(1)(v) Exceptions
1926.400 Electrical, Introduction
energized lines, above or below ground, passing through or near the jobsite ...
Subpart L Scaffolds, App C - List of National Consensus Standards
Airline Ground Support Vehicle-Mounted Vertical Lift Devices ANSI/SIA A92.8-1993 Vehicle-Mounted Bridge Inspection and Maintenance Devices ANSI ...