// CODE SNIPPET
1803.5 Maintenance of Devices, Equipment, Systems and Processes
JUMP TO FULL CODE CHAPTER
Maintenance of devices, equipment, systems and processes shall comply with the requirements of FC2703.2.6.
Related Code Sections
§28-304.6 Maintenance of Buildings, Inspection and Testing Process
shall be independent of all relative approved agencies, maintenance firms or other entities providing any associated services to the device owner. Such ...
NYC General Admin. Provisions 2014 > 3 Maintenance of Buildings > 304 Elevators and Conveying Systems > §28-304.6 Inspection and Testing Process
§28-314.3 Maintenance of Buildings, Inspection and Testing Process
device inspected and tested associated with the wastewater recycling system. A copy of the report, signed by the inspector performing the inspection ...
NYC General Admin. Provisions 2014 > 3 Maintenance of Buildings > 314 Periodic Wastewater Recycling System Inspection and Testing > §28-314.3 Inspection and Testing Process
§28-304.6 Maintenance of Buildings, Inspection and Testing Process
All devices shall be inspected and tested in accordance with sections 28-304.6.1 through 28-304.6.6 ...
NYC General Admin. Provisions 2008 > 3 Maintenance of Buildings > 304 Periodic Inspection of Elevators > §28-304.6 Inspection and Testing Process
*§28-318.3 Maintenance of Buildings, Inspection Process
Gas piping systems shall be inspected and tested in accordance with sections 28-318.3.1 through 28-318.3.4.
*Section 28-318.3 was added ...
NYC General Admin. Provisions 2014 > 3 Maintenance of Buildings > 318 Periodic Inspection of Gas Piping Systems > *§28-318.3 Inspection Process
502.9.8.6 Exhaust Systems, Process Equipment
Effluent from indoor and outdoor process equipment containing highly toxic or toxic compressed gases which could be discharged to the atmosphere ...
NYC Mechanical Code 2008 > 5 Exhaust Systems > 502 Required Systems > 502.9 Hazardous Materials—Requirements for Specific Materials > 502.9.8 Highly Toxic and Toxic Compressed Gases—Quantities Exceeding the Maximum Allowable Per Control Area > 502.9.8.6 Process Equipment