// CODE SNIPPET
605.11.1.3 Main Service Disconnect
JUMP TO FULL CODE CHAPTER
The marking shall be placed adjacent to the main service disconnect in a location clearly visible from the location where the disconnect is operated.
Related Code Sections
605.11.1.3 Building Services and Systems, Main Service Disconnect
The marking shall be placed adjacent to the main service disconnect in a location clearly visible from the location where the disconnect is operated ...
Fire Code 2012 of Tennessee > 6 Building Services and Systems > 605 Electrical Equipment, Wiring and Hazards > 605.11 Solar Photovoltaic Power Systems > 605.11.1 Marking > 605.11.1.3 Main Service Disconnect
(E) Special Conditions, Connection Ahead of Service Disconnecting Means
be sufficiently separated from the normal main service disconnecting means to minimize simultaneous interruption of supply through an occurrence within ...
National Electrical Code 2017 of Tennessee > 7 Special Conditions > 701 Legally Required Standby Systems > 701.12 General Requirements > (E) Connection Ahead of Service Disconnecting Means
430.95 Equipment for General Use, Service Equipment
Where used as service equipment, each motor control center shall be provided with a single main disconnecting means to disconnect all ungrounded ...
National Electrical Code 2017 of Tennessee > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.95 Service Equipment
(B) Wiring and Protection, Main Bonding Jumper
For a grounded system, an unspliced main bonding jumper shall be used to connect the equipment grounding conductor(s) and the service-disconnect ...
National Electrical Code 2017 of Tennessee > 2 Wiring and Protection > 250 Grounding and Bonding > 250.24 Grounding Service-Supplied Alternating-Current Systems > (B) Main Bonding Jumper