// CODE SNIPPET
(C) Luminaire Studs
Related Code Sections
(C) Equipment for General Use, Luminaire Studs
Luminaire studs that are not a part of outlet boxes, hickeys, tripods, and crowfeet shall be made of steel, malleable iron, or other material ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 410 Luminaires, Lampholders, and Lamps > 410.36 Means of Support > (C) Luminaire Studs
(3) Wiring Methods and Materials, Support Fittings Fill
Where one or more luminaire studs or hickeys are present in the box, a single volume allowance in accordance with Table 314.16(B) shall be made ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 314 Outlet, Device, Pull, and Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures > 314.16 Number of Conductors in Outlet, Device, and Junction Boxes, and Conduit Bodies > (B) Box Fill Calculations > (3) Support Fittings Fill
(D) Wiring and Protection, Luminaires
An outlet supplying luminaire(s) shall be calculated based on the maximum volt-ampere rating of the equipment and lamps for which the luminaire(s ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 220 Branch-Circuit, Feeder, and Service Load Calculations > 220.14 Other Loads — All Occupancies > (D) Luminaires
(J) Wiring and Protection, Luminaires
Luminaires as provided in Part V of Article 410 ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.112 Specific Equipment Fastened in Place (Fixed) or Connected by Permanent Wiring Methods > (J) Luminaires
(J) Wiring Methods and Materials, Luminaires
A box or conduit body shall not be required where a luminaire is used as a raceway as permitted in 410.64 ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 300 General Requirements for Wiring Methods and Materials > 300.15 Boxes, Conduit Bodies, or Fittings — Where Required > (J) Luminaires