// CODE SNIPPET
1926.307(p)(7) Lubrication
JUMP TO FULL CODE CHAPTER
The regular oilers shall wear tight-fitting clothing. Machinery shall be oiled when not in motion, wherever possible.
[58 FR 35176, June 30, 1993, as amended at 69 FR 31882, June 8, 2004]
[58 FR 35176, June 30, 1993, as amended at 69 FR 31882, June 8, 2004]
Related Code Sections
1926.307(p)(7) Tools - Hand and Power, Lubrication
The regular oilers shall wear tight-fitting clothing. Machinery shall be oiled when not in motion, wherever possible.
[58 FR 35176, June 30, 1993 ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.307 Mechanical Power-Transmission Apparatus > 1926.307(p) Care of Equipment > 1926.307(p)(7) Lubrication
1926.152(g)(7) Fire Protection and Prevention,
Heating equipment of an approved type may be installed in the lubrication or service area where there is no dispensing or transferring of Category 1 ...
OSHA 1926 Construction > F Fire Protection and Prevention > 1926.152 Flammable Liquids > 1926.152(g) Service and Refueling Areas > 1926.152(g)(7)
1926.1413(d) Cranes & Derricks in Construction,
Rope lubricants that are of the type that hinder inspection must not be used ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1413 Wire Rope--Inspection > 1926.1413(d)
1926.305(d)(1)(iii) Tools - Hand and Power,
All jacks shall be properly lubricated at regular intervals ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.305 Jacks-Lever and Ratchet, Screw, and Hydraulic > 1926.305(d) > 1926.305(d)(1) Operation and Maintenance > 1926.305(d)(1)(iii)
1926.66(d)(4) Occupational Health and Environmental Controls, Fan-Rotating Element
be of the self-lubricating type, or lubricated from the outside duct ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.66 Criteria for Design and Construction of Spray Booths > 1926.66(d) Ventilation > 1926.66(d)(4) Fan-Rotating Element