// CODE SNIPPET
907.3 Lower Section
JUMP TO FULL CODE CHAPTER
The lower section of the drainage stack shall be vented by a yoke vent connecting between the offset and the next lower horizontal branch. The yoke vent connection shall be permitted to be a vertical extension of the drainage stack. The size of the yoke vent and connection shall be not less than the size required for the vent stack of the drainage stack.
Related Code Sections
907.3 Vents, Lower Section
The lower section of the drainage stack shall be vented by a yoke vent connecting between the offset and the next lower horizontal branch . The ...
184.108.40.206 Elevators With Other Types of Driving Machines, Types of Entrances
-closing or manually operated horizontally swinging, two section (Dutch type) with one section above the other and the lower section extending not less ...
Safety Code for Elevators and Escalators 2016 of Kansas > 4 Elevators With Other Types of Driving Machines > 4.3 Hand Elevators > 4.3.6 Hoistway Entrances > 220.127.116.11 Types of Entrances
1.1.1 General, Equipment Covered by This Code
associated parts, rooms, spaces, and hoistways, where located in or adjacent to a building or structure (see Section 1.2): (a) hoisting and lowering ...
Safety Code for Elevators and Escalators 2016 of Kansas > 1 General > 1.1 Scope > 1.1.1 Equipment Covered by This Code
C402.4.3.3 [CE] Commercial Energy Efficiency, Dynamic Glazing
that is not dynamic glazing shall not be permitted. Exception: Dynamic glazing is not required to comply with this section where both the lower and higher labeled ...
Energy Conservation Code 2018 of Kansas > 4 [CE] Commercial Energy Efficiency > C402 Building Envelope Requirements > C402.4 Fenestration (Prescriptive) > C402.4.3 Maximum U-factor and SHGC > C402.4.3.3 Dynamic Glazing
406.2.2 Special Detailed Requirements Based on Occupancy and Use, Clear Height
are dispensed shall have a clear height in accordance with Section 406.7.2. Exception: A lower clear height is permitted for a parking tier ...
Building Code 2018 of Kansas > 4 Special Detailed Requirements Based on Occupancy and Use > 406 Motor-Vehicle-Related Occupancies > 406.2 Design > 406.2.2 Clear Height