// CODE SNIPPET
1910.262(n) Looms
JUMP TO FULL CODE CHAPTER
—
Each loom shall be equipped with a guard designed to minimize the danger of the shuttle flying out of the shed.
Provisions shall be made so that every loom fixer can prevent the loom from being started while he is at work on the loom. This may be accomplished by means of a lock, the key to which is retained in the possession of the loom fixer, or by some other effective means to prevent starting the loom.
Related Code Sections
1910.262(b)(20) Special Industries, Loom
A loom is a machine for effecting the interlacing of two series of yarns crossing one another at right angles. The warp yarns are wound on a warp ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(b) Definitions Applicable to This Section > 1910.262(b)(20) Loom
1910.262(n)(1) Special Industries, Shuttle Guard
Each loom shall be equipped with a guard designed to minimize the danger of the shuttle flying out of the shed ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(n) Looms > 1910.262(n)(1) Shuttle Guard
1910.262(b)(34) Special Industries, Slasher
, one or more cylindrical dryers or an enclosed hot air dryer, and a beaming end for finding the yarn on the loom beams ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(b) Definitions Applicable to This Section > 1910.262(b)(34) Slasher
1910.262(b) Special Industries, Definitions Applicable to This Section
A loom is a machine for effecting the interlacing of two series of yarns crossing one another at right ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(b) Definitions Applicable to This Section