// CODE SNIPPET
1910.147(c)(2) Lockout/Tagout
Go To Full Code Chapter
1910.147(c)(2)(i)
If an energy isolating device is not capable of being locked out, the employer's energy control program under paragraph (c)(1) of this section shall utilize a tagout system.
1910.147(c)(2)(iii)
After January 2, 1990, whenever replacement or major repair, renovation or modification of a machine or equipment is performed, and whenever new machines or equipment are installed, energy isolating devices for such machine or equipment shall be designed to accept a lockout device.
1910.147(c)(2)(ii)
If an energy isolating device is capable of being locked out, the employer's energy control program under paragraph (c)(1) of this section shall utilize lockout, unless the employer can demonstrate that the utilization of a tagout system will provide full employee protection as set forth in paragraph (c)(3) of this section.
Related Code Sections
1910.147(c)(2) General Environmental Controls, Lockout/Tagout
program under paragraph (c)(1) of this section shall utilize lockout, unless the employer can demonstrate that the utilization of a tagout system ...
1910.269(d)(6) Special Industries, Lockout/Tagout Application
The established procedures for the application of energy control (the lockout or tagout procedures) shall include the following elements and actions ...
1910.147(c)(2)(ii) General Environmental Controls,
utilize lockout, unless the employer can demonstrate that the utilization of a tagout system will provide full employee protection as set forth ...
1910.147(c)(2)(iii) General Environmental Controls,
machines or equipment are installed, energy isolating devices for such machine or equipment shall be designed to accept a lockout device ...
1910.147(e)(3)(i) General Environmental Controls,
Verification by the employer that the authorized employee who applied the device is not at the facility ...