// CODE SNIPPET
1926.404(c)(2) Location of Outdoor Lamps
JUMP TO FULL CODE CHAPTER
Lamps for outdoor lighting shall be located below all live conductors, transformers, or other electric equipment, unless such equipment is controlled by a disconnecting means that can be locked in the open position or unless adequate clearances or other safeguards are provided for relamping operations.
Related Code Sections
1926.404(c)(2) Electrical, Location of Outdoor Lamps
Lamps for outdoor lighting shall be located below all live conductors, transformers, or other electric equipment, unless such equipment is controlled ...
OSHA 1926 Construction > K Electrical > 1926.404 Wiring Design and Protection > 1926.404(c) Outside Conductors and Lamps > 1926.404(c)(2) Location of Outdoor Lamps
1926.66(c)(7) Occupational Health and Environmental Controls, Lamps
Electric lamps outside of, but within 20 feet (6.08 m) of any spraying area, and not separated therefrom by a partition, shall be totally enclosed ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.66 Criteria for Design and Construction of Spray Booths > 1926.66(c) Electrical and Other Sources of Ignition > 1926.66(c)(7) Lamps
1926.405(j)(1)(iii) Electrical, Portable Lamps
Portable lamps shall be wired with flexible cord and an attachment plug of the polarized or grounding type. If the portable lamp uses an Edison-based ...
OSHA 1926 Construction > K Electrical > 1926.405 Wiring Methods, Components, and Equipment for General Use > 1926.405(j) Equipment for General Use > 1926.405(j)(1) Lighting Fixtures, Lampholders, Lamps, and Receptacles > 1926.405(j)(1)(iii) Portable Lamps
1926.66(c) Occupational Health and Environmental Controls, Electrical and Other Sources of Ignition
operations. Portable electric lamps, if used during cleaning or repairing operations, shall be of the type approved for hazardous Class I locations ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.66 Criteria for Design and Construction of Spray Booths > 1926.66(c) Electrical and Other Sources of Ignition
1926.403(j)(3)(ii) Electrical, Lighting Outlets and Points of Control
The lighting outlets shall be so arranged that persons changing lamps or making repairs on the lighting system will not be endangered by live parts ...
OSHA 1926 Construction > K Electrical > 1926.403 General Requirements > 1926.403(j) Over 600 Volts, Nominal > 1926.403(j)(3) Workspace About Equipment > 1926.403(j)(3)(ii) Lighting Outlets and Points of Control