// CODE SNIPPET
430.14 Location of Motors
Go To Full Code Chapter
(A) Ventilation and Maintenance
Motors shall be located so that adequate ventilation is provided and so that maintenance, such as lubrication of bearings and replacing of brushes, can be readily accomplished.
Exception: Ventilation shall not be required for submersible types of motors.
(B) Open Motors
Open motors that have commutators or collector rings shall be located or protected so that sparks cannot reach adjacent combustible material.
Exception: Installation of these motors on wooden floors or supports shall be permitted.
Upcodes Diagrams
Related Code Sections
430.14 Equipment for General Use, Location of Motors
Motors shall be located so that adequate ventilation is provided and so that maintenance, such as lubrication of bearings and replacing of brushes ...
430.14 Equipment for General Use, Location of Motors
Motors shall be located so that adequate ventilation is provided and so that maintenance, such as lubrication of bearings and replacing of brushes ...
(B) Special Occupancies, Class I, Division 2
In Class I, Division 2 locations, motors, generators, and other rotating electrical machinery shall comply with (1), (2), or (3). They shall also ...
(B) Special Occupancies, Class I, Division 2
In Class I, Division 2 locations, motors, generators, and other rotating electrical machinery shall comply with (1), (2), or (3). They shall also ...
(A) Special Occupancies, Class II, Division 1
In Class II, Division 1 locations, motors, generators, and other rotating electrical machinery shall be in conformance with either of the following ...