// CODE SNIPPET
1910.68(b)(10)(ii) Location of Lower Pulley
JUMP TO FULL CODE CHAPTER
The lower (boot) pulley shall be installed so that it is supported by the lowest landing served. The sides of the pulley support shall be guarded to prevent contact with the pulley or the steps.
Related Code Sections
1910.68(b)(10)(ii) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Location of Lower Pulley
The lower (boot) pulley shall be installed so that it is supported by the lowest landing served. The sides of the pulley support shall be guarded ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.68 Manlifts > 1910.68(b) General Requirements > 1910.68(b)(10) Bottom Arrangement > 1910.68(b)(10)(ii) Location of Lower Pulley
1910.219(d)(2) Machinery and Machine Guarding, Location of Pulleys
Unless the distance to the nearest fixed pulley, clutch, or hanger exceeds the width of the belt used, a guide shall be provided to prevent the belt ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(d) Pulleys > 1910.219(d)(2) Location of Pulleys
1910.219(e)(5) Machinery and Machine Guarding, Cone-Pulley Belts
If the cone is located less than 3 feet from the floor or working platform, the cone pulley ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(e) Belt, Rope, and Chain Drives > 1910.219(e)(5) Cone-Pulley Belts
1910.219(e)(2) Machinery and Machine Guarding, Overhead Horizontal Belts
and lower runs of horizontal belts are so located that passage of persons between them would be possible, the passage shall be either ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(e) Belt, Rope, and Chain Drives > 1910.219(e)(2) Overhead Horizontal Belts
1910.262(l)(1) Special Industries, Band Pulley Covers
Covers for band pulleys shall be closed when the machine is in motion ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(l) Heavy Draw Boxes, Finishers, and Speeders Used in Worsted Drawing > 1910.262(l)(1) Band Pulley Covers