// CODE SNIPPET
5704.2.7.5.6 Location of Connections That Are Made or Broken
JUMP TO FULL CODE CHAPTER
Filling, withdrawal and vapor-recovery connections for Class I, II and IIIA liquids that are made and broken shall be located outside of buildings, not more than 5 feet (1524 mm) above the finished ground level, in an approved location in close proximity to the parked delivery vehicle. Such location shall be away from sources of ignition and not less than 5 feet (1524 mm) away from building openings. Such connections shall be closed and liquid tight when not in use and shall be properly identified.
Related Code Sections
5704.2.7.5.6 Flammable and Combustible Liquids, Location of Connections That Are Made or Broken
Filling, withdrawal and vapor-recovery connections for Class I, II and IIIA liquids that are made and broken shall be located outside of buildings ...
Fire Code 2015 of Wyoming > 57 Flammable and Combustible Liquids > 5704 Storage > 5704.2 Tank Storage > 5704.2.7 Design, Fabrication and Construction Requirements for Tanks > 5704.2.7.5 Tank Openings Other Than Vents > 5704.2.7.5.6 Location of Connections That Are Made or Broken
5704.2.7.5.6 Flammable and Combustible Liquids, Location of Connections That Are Made or Broken
Filling, withdrawal and vapor-recovery connections for Class I, II and IIIA liquids that are made and broken shall be located outside of buildings ...
Fire Code 2018 of Wyoming > 57 Flammable and Combustible Liquids > 5704 Storage > 5704.2 Tank Storage > 5704.2.7 Design, Fabrication and Construction Requirements for Tanks > 5704.2.7.5 Tank Openings Other Than Vents > 5704.2.7.5.6 Location of Connections That Are Made or Broken
(B) Equipment for General Use, Boxes That Are Flush
Receptacles mounted in boxes that are flush with the finished surface or project therefrom shall be installed such that the mounting yoke or strap ...
National Electrical Code, 2017 > 4 Equipment for General Use > 406 Receptacles, Cord Connectors, and Attachment Plugs (Caps) > 406.5 Receptacle Mounting > (B) Boxes That Are Flush
(A) Special Occupancies, General
shall be identified for Class I locations or shall be designed such that they cannot be energized while the connections are being made or broken ...
National Electrical Code, 2017 > 5 Special Occupancies > 513 Aircraft Hangars > 513.4 Wiring and Equipment in Class I Locations > (A) General
1029.9 Means of Egress, Assembly Aisles Are Required
by an aisle is that portion of the total space served by that section of the aisle . In establishing catchment areas, the assumption shall be made ...
Fire Code 2018 of Wyoming > 10 Means of Egress > 1029 Assembly > 1029.9 Assembly Aisles Are Required