// CODE SNIPPET
1906.8.3 Location for Force Transfer
JUMP TO FULL CODE CHAPTER
Construction joints shall be so made and located as not to impair the strength of the structure. Provision shall be made for the transfer of shear and other forces through construction joints in accordance with ACI 318, Section 11.7.9.
Related Code Sections
1906.8.3 Concrete, Location for Force Transfer
Construction joints shall be so made and located as not to impair the strength of the structure. Provision shall be made for the transfer of shear ...
NYC Building Code 2008 > 19 Concrete > 1906 Formwork, Embedded Pipes and Construction Joints > 1906.8 Construction Joints > 1906.8.3 Location for Force Transfer
2305.3.7.1 Wood, Force Transfer Around Openings
Where shear walls with openings are designed for force transfer around the openings, the limitations of Table 2305.3.3 shall apply to the overall ...
NYC Building Code 2008 > 23 Wood > 2305 General Design Requirements for Lateral-Force-Resisting Systems > 2305.3 Design of Wood Shear Walls > 2305.3.7 Shear Walls With Openings > 2305.3.7.1 Force Transfer Around Openings
618.5 Specific Appliances, Prohibited Sources
Outdoor or return air for a forced-air heating system shall not be taken from the following locations:
Less than 10 feet (3048 mm) from ...
NYC Fuel Gas Code 2014 > 6 Specific Appliances > 618 Forced-Air Warm-Air Furnaces > 618.5 Prohibited Sources
1908.1.5 Concrete, ACI 318, Section 21.10.1.1
Modify ACI 318, Section 21.10.1.1, to read as follows: 21.10.1.1 Foundations resisting earthquake-induced forces or transferring earthquake-induced ...
NYC Building Code 2008 > 19 Concrete > 1908 Modifications to ACI 318 > 1908.1 General > 1908.1.5 ACI 318, Section 21.10.1.1
Section 918 Specific Appliances, Fireplaces, Solid Fuel-Burning Equipment, and Noise Control Requirements, Forced-Air Warm-Air Furnaces
Outdoor or return air for a forced-air heating system shall not be taken from the following locations ...
NYC Mechanical Code 2014 > 9 Specific Appliances, Fireplaces, Solid Fuel-Burning Equipment, and Noise Control Requirements > 918 Forced-Air Warm-Air Furnaces