// CODE SNIPPET
1910.94(c)(2) Location and Application
JUMP TO FULL CODE CHAPTER
Spray booths or spray rooms are to be used to enclose or confine all operations. Spray-finishing operations shall be located as provided in sections 201 through 206 of the Standard for Spray Finishing Using Flammable and Combustible Materials, NFPA No. 33-1969.
Related Code Sections
1910.94(c)(2) Occupational Health and Environmental Control, Location and Application
Spray booths or spray rooms are to be used to enclose or confine all operations. Spray-finishing operations shall be located as provided in sections ...
OSHA 1910 General Industry > G Occupational Health and Environmental Control > 1910.94 Ventilation > 1910.94(c) Spray Finishing Operations > 1910.94(c)(2) Location and Application
1910.307(a) Electrical, Scope
This section covers the requirements for electric equipment and wiring in locations that are classified depending on the properties of the flammable ...
OSHA 1910 General Industry > S Electrical > 1910.307 Hazardous (Classified) Locations > 1910.307(a) Scope
1910.107(f)(1) Hazardous Materials, Conformance
as they are applicable. Sprinkler heads shall be located so as to provide water distribution throughout the entire booth ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.107 Spray Finishing Using Flammable and Combustible Materials > 1910.107(f) Protection > 1910.107(f)(1) Conformance
1910.120(n)(4) Hazardous Materials, Food Handling
All food service facilities and operations for employees shall meet the applicable laws, ordinances, and regulations of the jurisdictions in which ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.120 Hazardous Waste Operations and Emergency Response > 1910.120(n) Sanitation at Temporary Workplaces > 1910.120(n)(4) Food Handling
1910.1096(i)(3) Toxic and Hazardous Substances,
Each employer to whom this section applies shall post a current copy of its provisions and a copy of the operating procedures applicable to the work ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1096 Ionizing Radiation > 1910.1096(i) Instruction of Personnel, Posting > 1910.1096(i)(3)