// CODE SNIPPET
905.6.2 Located Upstream From Cooling Coils
Go To Full Code Chapter
Where duct furnaces are to be located upstream from cooling units, the cooling unit shall be so designed or equipped as to not develop excessive temperatures or pressures. [NFPA 54:10.10.6.3]
Upcodes Diagrams
Related Code Sections
905.6.2 Installation of Specific Appliances, Located Upstream From Cooling Coils
Where duct furnaces are to be located upstream from cooling units, the cooling unit shall be so designed or equipped as to not develop excessive ...
M1411.2 Heating and Cooling Equipment and Appliances, Refrigeration Coils in Warm-Air Furnaces
(124 Pa) static pressure unless the furnace is listed and labeled for use with a cooling coil. Cooling coils shall not be located upstream from heat ...
M1411.2 Heating and Cooling Equipment and Appliances, Refrigeration Coils in Warm-Air Furnaces
(124 Pa) static pressure unless the furnace is listed and labeled for use with a cooling coil. Cooling coils shall not be located upstream from heat ...
904.8 Installation of Specific Appliances, Refrigeration Coils
Furnaces shall not be located upstream from refrigeration coils, unless the refrigeration coil is designed or equipped so as not to develop excessive ...
6.4.1 Systems and Equipment, First Filtration Bank
Filter Bank No. 1 shall be placed upstream of the heating and cooling coils such that all mixed air is filtered ...