// CODE SNIPPET
700.15 Loads on Emergency Branch Circuits
Related Code Sections
700.15 Special Conditions, Loads on Emergency Branch Circuits
No appliances and no lamps, other than those specified as required for emergency use, shall be supplied by emergency lighting circuits ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 700 Emergency Systems > 700.15 Loads on Emergency Branch Circuits
10.6.5.1 Fundamentals, Branch Circuit
The branch circuit supplying the fire alarm equipment(s) or emergency communication system(s) shall be supplied by one of the following: Electric ...
National Fire Alarm and Signaling Code 2016 of Minnesota > 10 Fundamentals > 10.6 Power Supplies > 10.6.5 Primary Power Supply > 10.6.5.1 Branch Circuit
Article 700 Special Conditions, Emergency Systems
within this article. A device connected on the load side of a branch-circuit overcurrent protective device that transfers only emergency lighting ...
(B) Special Conditions, Wiring
to unit equipment, containing only the branch circuit supplying the unit equipment and the emergency circuit supplied by the unit equipment Wiring ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 700 Emergency Systems > 700.10 Wiring, Emergency System > (B) Wiring
422.10 Equipment for General Use, Branch Circuits
not be less than the marked rating of the appliance or the marked rating of an appliance having combined loads. The ampacities of branch-circuit ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 422 Appliances > 422.10 Branch Circuits