// CODE SNIPPET
1926.1436(e)(2)(ii) Load Tests for New Hoists
Go To Full Code Chapter
The employer must ensure that new hoists are load tested to a minimum of 110% of rated capacity, but not more than 125% of rated capacity, unless otherwise recommended by the manufacturer. This requirement is met where the manufacturer has conducted this testing.
Related Code Sections
1926.1436(e)(2)(ii) Cranes and Derricks in Construction, Load Tests for New Hoists
The employer must ensure that new hoists are load tested to a minimum of 110% of rated capacity, but not more than 125% of rated capacity, unless ...
1926.1436 Cranes and Derricks in Construction, Derricks
"). The employer must ensure that new hoists are load tested to a minimum of 110% of rated capacity, but not more than 125% of rated capacity, unless ...
1926.1436(e)(2)(iv) Cranes and Derricks in Construction, Load Test Procedure
: The test load must be hoisted a vertical distance to assure that the load is supported ...
1926.1431 Cranes and Derricks in Construction, Hoisting Personnel
testing). When hoisting personnel without a personnel ...
1926.1436(g)(3)(ii)(A) Cranes and Derricks in Construction,
Hoisting the test load a few inches and holding to verify that the load is supported by the derrick and held by the hoist brake(s) ...