// CODE SNIPPET
1709.2 Load Test Procedures Specified
JUMP TO FULL CODE CHAPTER
Where specific load test procedures, load factors and acceptance criteria are included in the applicable referenced standards, such test procedures, load factors and acceptance criteria shall apply. In the absence of specific test procedures, load factors or acceptance criteria, the corresponding provisions in Section 1709.3 shall apply.
Related Code Sections
1709.2 Special Inspections and Tests, Load Test Procedures Specified
Where specific load test procedures, load factors and acceptance criteria are included in the applicable referenced standards, such test procedures ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1709 Preconstruction Load Tests > 1709.2 Load Test Procedures Specified
1708.2.1 Special Inspections and Tests, Load Test Procedure Specified
Where a referenced material standard contains an applicable load test procedure and acceptance criteria, the test procedure and acceptance criteria ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1708 In-Situ Load Tests > 1708.2 In-Situ Load Tests > 1708.2.1 Load Test Procedure Specified
1708.2 Special Inspections and Tests, In-Situ Load Tests
The test shall simulate the applicable loading conditions specified in Chapter 16 as necessary to address the concerns regarding structural stability ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1708 In-Situ Load Tests > 1708.2 In-Situ Load Tests
Section 1708 Special Inspections and Tests, In-Situ Load Tests
be supervised by a registered design professional . The test shall simulate the applicable loading conditions specified in Chapter 16 as necessary ...
2109.2.1.2.3 Masonry, Testing Procedure
A vertical load shall be applied to the cylinder at the rate of 500 pounds per minute (37 N/s) until failure occurs ...
Building Code 2018 of Illinois > 21 Masonry > 2109 Empirical Design of Adobe Masonry > 2109.2 Adobe Construction > 2109.2.1 Unstabilized Adobe > 2109.2.1.2 Modulus of Rupture > 2109.2.1.2.3 Testing Procedure