// CODE SNIPPET
[F] 2702.1.5 Load Duration
JUMP TO FULL CODE CHAPTER
Emergency power systems and standby power systems shall be designed to provide the required power for a minimum duration of 2 hours without being refueled or recharged, unless specified otherwise in this code.
Related Code Sections
2702.1.5 Electrical, Load Duration
Emergency power systems and standby power systems shall be designed to provide the required power for a minimum duration of 2 hours without being ...
Building Code 2018 of Illinois > 27 Electrical > 2702 Emergency and Standby Power Systems > 2702.1 General > 2702.1.5 Load Duration
6.7.1.1 Structural Analysis,
of load duration. These considerations are satisfied using the cross-sectional properties defined in 6.7.2 ...
Building Code Requirements for Structural Concrete of Illinois > 6 Structural Analysis > 6.7 Elastic Second-Order Analysis > 6.7.1 General > 6.7.1.1
1708.2.2 Special Inspections and Tests, Load Test Procedure Not Specified
duration, the test load shall be adjusted to account for the difference in load duration of the test compared to the expected duration of the design ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1708 In-Situ Load Tests > 1708.2 In-Situ Load Tests > 1708.2.2 Load Test Procedure Not Specified
24.2.4.1.3 Serviceability Requirements,
—Time-dependent factor for sustained loads Sustained load duration, months Time-dependent factor ξ 3 1.0 6 1.2 12 ...
Building Code Requirements for Structural Concrete of Illinois > 24 Serviceability Requirements > 24.2 Deflections Due to Service-Level Gravity Loads > 24.2.4 Calculation of Time-Dependent Deflections > 24.2.4.1 Nonprestressed Members > 24.2.4.1.3
2306.1.3 Wood, Treated Wood Stress Adjustments
and the redrying process. Other adjustments are applicable except that the impact load duration shall not apply ...
Building Code 2018 of Illinois > 23 Wood > 2306 Allowable Stress Design > 2306.1 Allowable Stress Design > 2306.1.3 Treated Wood Stress Adjustments