// CODE SNIPPET
Section 2307 Load and Resistance Factor Design
JUMP TO FULL CODE CHAPTER
The design and construction of wood elements and structures using load and resistance factor design shall be in accordance with ANSI/AWC NDS and AWC SDPWS.
Related Code Sections
Section 2307 Wood, Load and Resistance Factor Design
The design and construction of wood elements and structures using load and resistance factor design shall be in accordance with ANSI/AWC NDS ...
1605.2 Structural Design, Load Combinations Using Strength Design or Load and Resistance Factor Design
Where strength design or load and resistance factor design is used, buildings and other structures, and portions thereof, shall be designed to resist ...
Building Code 2018 of Illinois > 16 Structural Design > 1605 Load Combinations > 1605.2 Load Combinations Using Strength Design or Load and Resistance Factor Design
1604.1 Structural Design, General
Building, structures and parts thereof shall be designed and constructed in accordance with strength design, load and resistance factor design ...
Building Code 2018 of Illinois > 16 Structural Design > 1604 General Design Requirements > 1604.1 General
2302.1 Wood, General
of the following methods: Allowable stress design in accordance with Sections 2304, 2305 and 2306. Load and resistance factor design in accordance ...
1616.2.2.2 Structural Design, Beams
for allowable stress design (ASD) or two-thirds of the required shear strength for load and resistance factor design (LRFD) but not less than 10 kips (45 kN ...
Building Code 2018 of Illinois > 16 Structural Design > 1616 Structural Integrity > 1616.2 Frame Structures > 1616.2.2 Structural Steel, Open Web Steel Joist or Joist Girder, or Composite Steel and Concrete Frame Structures > 1616.2.2.2 Beams