// CODE SNIPPET
(B) Limited Conductor Space
JUMP TO FULL CODE CHAPTER
Related Code Sections
(B) Wiring Methods and Materials, Limited Conductor Space
Where space is too limited to provide these minimum clearances, such as at meters, panelboards, outlets, and switch points, the individual conductors ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 394 Concealed Knob-And-Tube Wiring > 394.19 Clearances > (B) Limited Conductor Space
(A) Equipment for General Use, Branch/Feeder Circuit Conductors
but are not limited to the output voltage, frequency, and current, the length of the conductors, the spacing between the conductors, and the dielectric ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.122 Conductors — Minimum Size and Ampacity > (A) Branch/Feeder Circuit Conductors
490.24 Equipment for General Use, Minimum Space Separation
conditions. They shall be increased for conductor movement or under unfavorable service conditions or wherever space limitations permit. The selection ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 490 Equipment Over 1000 Volts, Nominal > 490.24 Minimum Space Separation
392.80 Wiring Methods and Materials, Ampacity of Conductors
Informational Note: See 110.14(C) for conductor temperature limitations due to termination provisions. (1) Multiconductor Cables. The ampacity ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 392 Cable Trays > 392.80 Ampacity of Conductors
410.20 Equipment for General Use, Space for Conductors
Canopies and outlet boxes taken together shall provide sufficient space so that luminaire conductors and their connecting devices are capable ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 410 Luminaires, Lampholders, and Lamps > 410.20 Space for Conductors