// CODE SNIPPET
(D) Limitations to Permissible Alterations
JUMP TO FULL CODE CHAPTER
This section shall not be considered as permitting electronic equipment to be operated on ac systems or branch circuits that are not connected to an equipment grounding conductor as required by this article. Currents that introduce electromagnetic interference or data errors in electronic equipment shall not be considered the objectionable currents addressed in this section.
Related Code Sections
(D) Wiring and Protection, Limitations to Permissible Alterations
This section shall not be considered as permitting electronic equipment to be operated on ac systems or branch circuits that are not connected ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.6 Objectionable Current > (D) Limitations to Permissible Alterations
126.96.36.199 General Requirements, Limited-Use/Limited-Application Elevators
Safety Code for Elevators and Escalators 2016 of Minnesota > 8 General Requirements > 8.7 Alterations > 8.7.5 Alterations to Special Application Elevators > 188.8.131.52 Limited-Use/Limited-Application Elevators
24.5.3 Serviceability Requirements, Permissible Concrete Stresses at Transfer of Prestress
not exceed the limits in Table 184.108.40.206. Table 220.127.116.11—Concrete compressive stress limits immediately after transfer of prestress Location ...
Building Code Requirements for Structural Concrete of Minnesota > 24 Serviceability Requirements > 24.5 Permissible Stresses in Prestressed Concrete Flexural Members > 24.5.3 Permissible Concrete Stresses at Transfer of Prestress
424.10 Equipment for General Use, Special Permission
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 424 Fixed Electric Space-Heating Equipment > 424.10 Special Permission