// CODE SNIPPET
424.64 Limit Controls
JUMP TO FULL CODE CHAPTER
Each duct heater shall be provided with an approved, integral, automatic-reset temperature-limiting control or controllers to de-energize the circuit or circuits.
In addition, an integral independent supplementary control or controllers shall be provided in each duct heater that disconnects a sufficient number of conductors to interrupt current flow. This device shall be manually resettable or replaceable.
Related Code Sections
424.64 Equipment for General Use, Limit Controls
Each duct heater shall be provided with an approved, integral, automatic-reset temperature-limiting control or controllers to de-energize the circuit ...
National Electrical Code 2020 of Texas > 4 Equipment for General Use > 424 Fixed Electric Space-Heating Equipment > 424.64 Limit Controls
425.64 Equipment for General Use, Limit Controls
Each duct heater shall be provided with an integral, automatic-reset temperature-limiting control or controllers to de-energize the circuit ...
National Electrical Code 2020 of Texas > 4 Equipment for General Use > 425 Fixed Resistance and Electrode Industrial Process Heating Equipment > 425.64 Limit Controls
425.74 Equipment for General Use, Overpressure Limit Control
with a pressure-sensitive limiting means. It shall be installed to limit maximum pressure and shall directly or indirectly disconnect all ungrounded ...
National Electrical Code 2020 of Texas > 4 Equipment for General Use > 425 Fixed Resistance and Electrode Industrial Process Heating Equipment > 425.74 Overpressure Limit Control
425.83 Equipment for General Use, Overtemperature Limit Control
-sensitive limiting means. It shall be installed to limit maximum liquid temperature and shall directly or indirectly interrupt all current flow through ...
National Electrical Code 2020 of Texas > 4 Equipment for General Use > 425 Fixed Resistance and Electrode Industrial Process Heating Equipment > 425.83 Overtemperature Limit Control
425.84 Equipment for General Use, Overpressure Limit Control
with a pressure-sensitive limiting means. It shall be installed to limit maximum pressure and shall directly or indirectly interrupt all current flow ...
National Electrical Code 2020 of Texas > 4 Equipment for General Use > 425 Fixed Resistance and Electrode Industrial Process Heating Equipment > 425.84 Overpressure Limit Control